LED1S APPLICATION FILE PAGE
|
FILE |
TYPE |
Created using |
OPERATION LED1S demonstrates software switch debouncing using a delay subroutine, as applied to the LED counting program. The
schematic shows the RC clock circuit with frequency adjustment to trim the
clock to 40kHz. Note however that the simulation clock frequency is still set
up via the MCU properties. The
ICD interface is shown with an in line connector which allows the program to
be downloaded via the Microchip In-Circuit Debugging (ICD) interface from the
host PC. |
|
Design File |
ISIS Schematic Capture |
||
|
Source Code |
Text editor |
||
|
List File |
Assembler MPASM |
||
|
Machine Code |
Assembler MPASM |
||
|
|
|||
